The slitting machine is mainly used for slitting mica tape, paper, insulation materials, and thin films, and is suitable for slitting narrow strips (insulation materials, mica tape, thin films, etc.). A slitting machine is a pre press and post press equipment that cuts a large roll of paper, film, non-woven fabric, aluminum foil, mica tape, and other thin materials into small rolls of different widths. It is commonly used in papermaking and printing packaging machinery. The slitting machine has evolved from single motor control to dual motor and three motor control, making it more stable and efficient at higher machine speeds.
When operating the slitting machine, the following precautions should be taken:
1. The slitting machine needs to perform fixed length slitting processing on the entire roll or sheet of raw materials, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., all of which require fixed length slitting control.
2. Fixed length slitting control is divided into two types: static and dynamic slitting: accurate shutdown when the set length is reached, then static slitting processing, and restart operation after slitting; When the set length is reached, the cutting machine will not stop and send out a cutting signal, and the cutting machine will dynamically cut and process the material during its movement.
3. The important performance indicators for fixed length cutting are cutting accuracy and good consistency in the length of the finished product.